Apollo Computing Laboratories (P) LtdInnovation is our Tradition

mktg@apollocomputing.com

+91-40- 27141522, 27141533

 
ACL is an authorised test centre for Pearson VUE.

SOLID STATE WIDE BAND POWER AMPLIFIER 750-1000MHz-100Watt

This is a 100 Watt driver amplifier with gain of 50dB.This Amplifier is used as a driver for 1KWatt amplifier development. The driver provides an uniform output impedance for 50Ω at the input of the front stage.

Frequency Range : 750-1000MHz

RF Power Output : 100W ± 1dB

RF Power Input : 0dBm

Gain : 50 dB

Gain Flatness : ±3dB

Spurious Output : < -60 dBc

Input Output Impedance : 50Ω

Class of Operation : AB

Operating Voltage : +24V dc

Current consumption : 25Amp

20-100MHz-30 Watt

This is a general purpose HF amplifier delivering 30 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 230VAc and packaged in a 170 x 150x 69mm size and weighs 5Kgs.

Frequency Range : 20-100MHz.

RF Power Output : 30W ± 1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ± 2.0dB CW/PEP for full power output.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF.

Power Supply : 28V 15Amp.

Size & Weight : 170 x 150x 69mm:5kgs.

20-100MHz-125 Watt

This is a general purpose HF amplifier delivering 125 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28 VDC and packaged in a 19” x3U size and weighs 15Kgs.

Frequency Range : 20-100MHz.

RF Power Output : 125W ±1.0dB CW/PEP into 50Ω load. Reducible down to 50W in steps of 3dB.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Output of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-Noise Quieting ON/OFF,RF ON/OFF,Power Selection,AM/FM.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 30Amp.

Size & Weight : 3U x19''x375mm:15kgs.

20-100MHz-500 Watt

This is a general purpose HF amplifier delivering 500 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28 VDC and packaged in a 19” x3U size and weighs 25Kgs.

Frequency Range : 20-100MHz.

RF Power Output : 500W ±1.0dB CW/PEP into 50Ω load. Reducible down to 50W in steps of 3dB.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Output of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-Noise Quieting ON/OFF.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 100Amp.

Size & Weight : 3U x19''x375mm:15kgs.

20-100MHz-1.5K Watt

This is a general purpose HF amplifier delivering 1.5 KWatts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28 V DC and packaged in a 19” x3U size and weighs 15Kgs.

Frequency Range : 20-100MHz.

RF Power Output : 1.5KW ±1.0dB CW/PEP into 50Ω load. Reducible down to 50W in steps of 3dB.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Output of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-Noise Quieting ON/OFF,RF ON/OFF,Power Selection,AM/FM.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 100Amp.

Size & Weight : 3U x19''x375mm:15kgs.

30-100MHz-500Watt

This is a general purpose HF amplifier delivering 500 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28 VDC and packaged in a 19” x3U size and weighs 25Kgs.

Frequency Range : 30-100MHz.

RF Power Output : 500W ±1.0dB CW/PEP into 50Ω load. Reducible down to 50W in steps of 3dB.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Output of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-Noise Quieting ON/OFF.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 100Amp.

Size & Weight : 3U x19''x375mm:15kgs.

100-250MHz-30 Watt

This is a general purpose amplifier delivering 30 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28 VDC and packaged in a 19” x3U size and weighs 15Kgs.

Frequency Range : 100-250MHz.

RF Power Output : 30W ± 1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ± 2.0dB CW/PEP for full power output.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF.

Power Supply : 28V 15Amp.

Size & Weight : 170 x 150x 69mm:5kgs.

100-250MHz-125Watt

This is a general purpose amplifier delivering 125 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x3U size and weighs 25Kgs.

Frequency Range : 100-250MHz.

RF Power Output : 125W ±1.0dB CW/PEP into 50Ω load. Reducible down to 50W in steps of 3dB.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Output of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-Noise Quieting ON/OFF,RF ON/OFF,Power Selection,AM/FM.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 30Amp.

Size & Weight : 3U x19''x375mm:15kgs.

100-250MHz-150Watt

This is a general purpose amplifier delivering 150 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x4U size and weighs 25Kgs.

Frequency Range : 100-250MHz.

RF Power Output : 150W ±1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Out of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF. Remote(TTL)-Noise Quieting ON/OFF, RF ON/OFF, Power level selection, AM/FM.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON.

Power Supply : 28V 35Amp.

Size & Weight : 3U x19''x375mm:15kgs.

100-500MHz-200Watt

This is a general purpose amplifier delivering 200 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x4U size and weighs 25Kgs.

Frequency Range : 100-500MHz.

RF Power Output : 200W ±1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Out of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF. Remote(TTL)-Noise Quieting ON/OFF,RF ON/OFF, Power level selection, AM/FM.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 40Amp.

Size & Weight : 4U x19''x450mm:25kgs.

100-500MHz-500Watt

This is a general purpose amplifier delivering 500 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x4U size and weighs 25Kgs.

Frequency Range : 100-500MHz.

RF Power Output : 500W ±1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Out of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-Noise Quieting ON/OFF.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 100Amp.

Size & Weight : 3U x19''x375mm:15kgs.

250-500MHz-30Watt

This is a general purpose amplifier delivering 30 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28 VDC and packaged in a 19” x3U size and weighs 5Kgs. .

Frequency Range : 250-500MHz.

RF Power Output : 30W ± 1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ± 2.0dB CW/PEP for full power output.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF.

Power Supply : 28V 15Amp.

Size & Weight : 170 x 150x 69mm:5kgs.

250-500MHz-125Watt

This is a general purpose amplifier delivering 125 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x3U size and weighs 15Kgs.

Frequency Range : 250-500MHz.

RF Power Output : 125W ± 1.0dB CW/PEP into 50Ω load.

RF Power Input : 0dBm ± 2.0dB CW/PEP for full power output.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF.

Power Supply : 28V 30Amp.

Size & Weight : 170 x 150x 69mm:5kgs.

250-500MHz-150Watt

This is a general purpose amplifier delivering 150 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x3U size and weighs 15Kgs.

Frequency Range : 250-500MHz.

RF Power Output : 150W ±1.0dB CW/PEP into 50Ω load. Reducible down to 50W in steps of 3dB.

RF Power Input : 0dBm ±2.0dB CW/PEP for full power output.

Input Over drive Protection : 8dBm ±2dBm.

Out of band drive Protection : +8dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even ≤-20dBc, Odd ≤-12dBc.

Spurious : ≤-60dBc.

Class of Operation : AB.

Input Signal : AM, FM, CW and PULSE.

AM Depth : 85% Depth of Modulation (DOM).

AM Distortion from 300Hz to 3.5 KHz : < 10% for 85% D.O.M at signal frequency.

Pulse Rise / Fall Time : < 500n sec.

Noise Power Output : -85dBm/Hz Max.

Protections : Thermal Overload, against high load VSWR, Input overdrive.

Built in Test : power meter-Forward/Reflected Power, Module Status, Fault indication.

Controllability: Local-power level selection (3dB steps), Power Meter for FWD/REF Power, AM/FM, NQ ON/OFF, RF ON/OFF, Remote(TTL)-RF ON/OFF, Power level selection, AM/FM.

Indication: LED's for AM/FM, NQ RF, Thermal Fault, VSWR Fault, ODC Fault, Module Status, DC Power ON, Local/Remote.

Power Supply : 28V 35Amp.

Size & Weight : 3U x19''x375mm:15kgs.

400-450MHz-1K Watt

This is a general purpose amplifier delivering 1.0K Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x7U size and weighs 40Kgs.

Electrical:

Frequency Range :400-450 MHz.

RF Power Output : 1000W±1db CW/PEP into 50Ω load.

RF Power Input : 0dBm±2.0 dB for full power output.

Imput Over Drive Protection : +8 dBm max.

Output Load VSWR (max) : 3:1.

Harmonics : Even: < -20 dBc, Odd: < -12dBc,Spurious:< -60 dBc.

Class of operation : AB.

Input Signal : AM, FM, CW, Pulse.

AM Distortion : < 10% for 85% D.O.M at 1 KHz signal frequency.

Built-in-test : Forward/Reflected Power,Fault indication, Module Status.

Protections : High Load VSWR, Thermal Overload, Input Overdrive.

Interface : TTL.

Power Consumption : 180 Amps Max at 28V DC.

Size & Weight : Power Amplifier - 7U x 19" x 650mm-40 Kgs.

Environmental:

Operating Temperature :0 to +55°C.

Storage Temperature : -10°C to +70°C.

Humidity : 95% at 40°C.

500-750MHz-100 Watt

This is a general purpose amplifier delivering 100 Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x3U size and weighs 15Kgs.

Electrical:

Frequency Range :500-750 MHz.

RF Power Output : 100W,±1dB.

RF Power Input : 0 dBm.

Gain : 50 dB.

Gain Flatness : ±3dB.

Spurious Output : < -60 dBc.

Harmonics : Even < -14dBc, Odd < -12dBc.

In/out Impedance : 50Ω Normal.

Class of Operation : AB.

Load VSWR : 3.5:1.

Input VSWR : 2:1.

Primary Voltage : +24V DC.

Current Consumption : 25Amp.

Protection : VSWR, High Temperature and Input over Drive.

Connectors : N (F) for Output, SMA (F) for Input, Circular (M) 4 pin for +24V.

Environmental:

Dimensions :3U x 19" x 375mm.

Weight : 15 Kgs (Approx.).

Operating Temperature :-10°c to +55°c.

Storage Temperature : -20°c to +70°c.

1357.5-1000Watt

This is a general purpose amplifier delivering 1.0K Watts power with excellent spurious rejection performance. The amplifier accepts RF input with AM, FM and Pulse modulations in addition to CW. The Noise power output is better than -85dBm/ Hz. The amplifier is well protected against thermal over load,input over drive and high VSWR. Ouput power can be controlled remotely in steps of 3 dB. The amplifier operates from 28VDC and packaged in a 19” x6U size and weighs 40Kgs.

Electrical:

Frequency of Operation :1357.5MHz.

Peak Output Power : 1K Watt±1dB.

Hormonic level : < 40dB.

Duty Ration : Upto 10%.

Input Level Ration :-5dBm.

Mode Of Operation : pulsed.

Input Output impedance : 50Ω.

Output Laod(VSWR(Max) ) : 3:1.

Protections : High VSWR,Input Over Drive,High Temperature.

Power Supply : 230V AC,50 Hz.