Apollo Computing Laboratories (P) LtdInnovation is our Tradition
+91-40- 27141522, 27141533
Environmental Test Facility (ETF)
ACL - Apollo Computing Laboratories (P) Ltd.,established in 1992 at Hyderabad has been involved in the Manufacturing of Electronic Systems in the domain of embedded computing for the National Programmes of Defence & Aerospace organisations. Parallelly, ACL has established Environmental Test Facility at their Factory premises to cater to the needs of Qualification & Acceptance testing according to various Defence Standards. Apart from catering to our own testing requirements, these facilities are available for other organisations also at reasonable charges.
We can conduct
Dynamic Tests :
Vibration
Acceleration
Shock & Bump
Climatic Tests :
Temperature Cycling
High Temperature
Low Temperature
Damp Heat
Tropical Exposure
Burn-in
Capacity : 2500 kgf
Max Acceleration ( Bare Table ) : 75g is sine mode and 53g in Random mode
Frequency Range : Up to 2.2 KHz
Shaker Rotaion : ±90o to connect to the Slip table
Acceleration Range : 1 to 100 G
Capacity : 5000 G-Kg
Maximum Payload :
50 KgPayload size : 550 x 550 x 550 mm
Speed Range : 30 to 400 R.P.M
Table Size : 750 x 750 mm
Table Weight : 100 Kg
Max Specimen Weight : 150 Kg ( Including Fixture weight )
Max Specimen size(mm) : 750(W) X 750(T) X Unlimited(H)
Minimum Pulse Width : 6 ± 1 milli seconds
Maximum Pulse Width : 15 milli seconds ( ± 10%)
Maximum Acceleration : Up to 15 to 50 'g' ( ± 10%)
Cycling Rate : 60 to 180 bumps per minute
Thermal cycling chamber type - I Specifications:
Type : Temperature & Humidity Chamber
Temperature Range : - 65 °C to +110 °C
Humidity Range : 20 to 95% RH
Rate of Heating/Cooling : 5 °C / minute
Workspace Dimensions : 1 mtr (W) X 1mtr (ID) X lmtr (H)
Thermal cycling chamber type - II Specifications:
Type of Chamber : Temperature Humidity
Temperature Range : -70 °C to +180 °C
Humidity Range : 10 to 98% RH
Rate of Heating / Cooling : 10 °C/minute
Workspace Dimensions :61Omm(W) X 610mm(D) X 610mm(H)
Thermal cycling chamber type - III Specifications:
Type of Chamber : Temperature Humidity
Temperature Range : -70 °C to +180 °C
Humidity Range : 10 to 95% RH
Rate of Heating / Cooling : 2 °C/minute
Workspace Dimensions : 450mm(W) X 450mm(D) X 450mm(H)
Hot air chamber Specifications:
Type of Chamber : Temperature
Temperature Range : +130 °C
Workspace Dimensions : 300mm(W) X 300mm(D) X 300mm(H)
Support
The products will be under warranty for a period of 12 months from the date of installation.
In this period all the products supplied will be covered under comprehensive warranty inclusive of all the parts of the system / equipment against any manufacturing / design defects.